UK Statutory Health & Safety Storefront

Under CDM 2015 Regulation 12, a Construction Phase Plan (CPP) must be drawn up before construction work begins on any project with more than one contractor. Our Master CPP Kit provides the full statutory architecture required under Regulation 13:

• Schedule 3 Particular Risks: Deep excavations, structural collapse, falls from height, buried utilities, high-voltage substations, and confined spaces.
• Pre-Construction Information (PCI): Integration protocols for geotechnical surveys, asbestos R&D registers, and underground utility searches.
• Site Rules & Welfare: Mandatory 5-point PPE, substance misuse screening protocol, and traffic management segregation.
• Building Safety Act 2022: Gateway 2 & 3 sign-offs and Golden Thread digital safety case evidence.

Complies with the Dangerous Substances and Explosive Atmospheres Regulations 2002 (SI 2002 No. 2776) and HSE Approved Code of Practice L138. Essential for sites handling flammable vapours, gases, combustible dusts, or high-pressure systems:

• Hazardous Area Classification (Zoning): Gas/vapour Zone 0, Zone 1, Zone 2 and combustible dust Zone 20, Zone 21, Zone 22.
• ATEX Equipment Standards: BS EN 60079 compliance for certified intrinsically safe electrical equipment and mechanical spark elimination.
• Hot Works Permit Integration: 15-metre combustible clearance, calibrated 4-gas atmosphere monitoring (LEL <5%), and 60-minute fire watch.
• Static Grounding & Bonding: Dissipative footwear (BS EN ISO 20345) and certified earth bonding clamps during fuel transfer.

Enforces the Control of Substances Hazardous to Health Regulations 2002, HSE publication EH40/2005 Workplace Exposure Limits (WELs), and the 8 Principles of Good Practice for occupational chemical management:

• EH40 WEL Compliance: Statutory 8-hour TWA and 15-minute STEL exposure thresholds for respirable crystalline silica (RCS), isocyanates, and solvents.
• Local Exhaust Ventilation (LEV): Statutory 14-month thorough examination registers under COSHH Regulation 9.
• RPE Selection Matrix: EN 149 FFP3 (APF 20) and powered air-purifying respirators (APF 40) with face-fit test certificates.
• Health Surveillance: Lung function spirometry and skin inspection regimes for high-potency sensitisers.

Every single hazard in our 35 documents is quantified using the HSE ALARP 5×5 Matrix (Severity 1–5 × Likelihood 1–5). Demonstrates the legal test under HSAWA 1974 Section 2 that risks are As Low As Reasonably Practicable:

• Dual Rating Method: Explicit Initial Uncontrolled Risk vs Residual Controlled Risk scores.
• Hierarchy of Risk Controls: Elimination, substitution, engineering controls, administrative procedures, and PPE.
• Mandatory Stop Work Authority (Score ≥17): Any critical score halts the task until physical hazard redesign is proven.
• Named Dutyholders: Every residual control is assigned to a certificated dutyholder (SMSTS, CPCS, CISRS, NICEIC).

Principal Contractor

Must draw up, implement, and review the Construction Phase Plan. Coordinate all trade subcontractors, ensure site welfare facilities, and enforce site rules and mandatory inductions.

Principal Designer

Plan, manage, and monitor health and safety in the pre-construction phase. Identify, eliminate, or control foreseeable risks and assist the client in preparing Pre-Construction Information (PCI).

Trade Subcontractors

Plan and manage their own work. Provide trade-specific RAMS aligned with the Principal Contractor Construction Phase Plan. Verify worker competency (CSCS, CPCS, CISRS, NICEIC).

Commercial Client

Appoint the Principal Designer and Principal Contractor in writing. Ensure suitable management arrangements and allow sufficient time and resources before construction commencement.

Why Tier-1 Principal Contractors Choose Our Library

Every document in this storefront has been authored and reviewed by Chartered Safety and Health Practitioners (CMIOSH) and DipNEBOSH specialists with extensive field experience across civil engineering, high-voltage substations, structural steelwork, and passive fire safety.

Pre-Qualification Accreditation Ready

Designed to pass stage 1 audit assessments across all Safety Schemes in Procurement (SSIP) member schemes:

What format are the documents delivered in?

All 35 UK compliance documents and master packs are delivered as fully editable Microsoft Word (.docx) files. There are no password locks, proprietary software restrictions, or watermarks. You can insert your company logo, project directory, site specifics, and contractor details immediately.

Do these documents comply with the Building Safety Act 2022?

Yes. Our CDM 2015 Construction Phase Plan Master Kit and high-risk structural packages are structured to support the Golden Thread of building information and Gateway 2/3 statutory submissions for Higher-Risk Buildings (HRBs).

How does the HSE ALARP 5x5 Matrix work?

Each hazard is scored initially (Uncontrolled Risk) on a 1–5 Severity and 1–5 Likelihood scale. The document then outlines the hierarchy of risk controls (Elimination, Engineering, Administrative, PPE) and calculates the Residual Controlled Risk. Any initial risk score of 17 or greater triggers a mandatory Stop Work Authority until structural engineering mitigations are in place.

How soon do I receive my document after payment?

Instantly. Upon completing secure payment via Stripe (Credit Card, Debit Card, or Apple Pay), a secure download token is generated and your Microsoft Word (.docx) document is made available immediately on the confirmation page and emailed to your address.